Maserati compatible OBD2 and ELM327

Diagnostic DS3 with klavkarr

Several thousand OBD2-compatible vehicles have been tested by our customers with klavkarr. You can read their feedback on this page. Check that the klavkarr diagnostic scanner will work with your car.

Select the make of your car

Our registered users have enabled us to create this table, and we thank them. It contains 10454 vehicles tested including 3221 of different types or configuration.

We remind you that the EOBD standard is governed by legislation that states that vehicles must be compatible from a specific date. More information on presentation of the OBD.

To easily diagnose your own car, download our EOBD-Facile car diagnostic software..

attentionAll GASOLINE vehicle since 2001and DIESEL vehicle since 2004 are COMPATIBLE even if they are not in the list.

attentionFind a vehicle make rapidly by using the search function in your web browser (CTRL + F) and for more details about the meaning of modes, check out our page OBD modes & PID.

Make(1) Engine AM Fuel P(2) Compatible OBD2 Klakarr compatible ?

Maserati 3200 gt

3200 gt (x7)3.22000
Essence376Image cocheThe scanner is compatible
+ More info

Maserati 4200 gt

4200 gt (x2)4.2 v82002
Essence390Image cocheThe scanner is compatible
+ More info

Maserati Coupe

Coupe (x3)4.22002
Essence390Image cocheThe scanner is compatible
+ More info

Maserati Gransport

Gransport4.3 V82006Essence400Image cocheThe scanner is compatible
+ More info

Maserati Granturismo

Where is the OBD2 port on Maserati Grand Tourismo Sport (2012 ...) ?
Granturismo4.72014Essence454Image cocheThe scanner is compatible
+ More info

Maserati Quattroporte

Where is the OBD2 port on Maserati Quattroporte (2004 - 2012) ?
Quattroporte4.2 L2007Essence296Image cocheThe scanner is compatible
+ More info

Maserati Spyder

Spyder (x2)4.22002Essence390Image cocheThe scanner is compatible
+ More info
Go to the car
scanner for MASERATI

(1) - The digits between brackets (x3) correspond to the number of vehicles of the same type tested
(2) - Power in DIN horsepower (multiplied by 0.736 for the power in kW)
(3) - PID only supported for the main oxygen sensor (no.1)
Mode X column: A vehicle showing 00000000 on a mode means that no corresponding PID is active and that as a result the mode is supported but will not reply to any requests. None of the vehicles described below support mode 8.
Energy column: type of fuel, Die for diesel, Pet for petrol, Hyb for hybrid
Vehicles in this list are classified in alphabetical order depending on the make then the model, then in order of increasing power

If your vehicle is not in the table below, go to the next site also containing a list of vehicles tested. Note, the interface and protocol used as not all are supported by an ELM type interface.

All compatible brands (in alphabetical order)

Interpreting table data

The tables on this page represent lists of vehicles that are compatible with the OBD standard (EOBD or OBD2 depending on the country). Compatible vehicles can be diagnosed using generic (multibrand) ELM327 interfaces.

Table utility

There are several uses:

  • While the official dates for implementing the standard have been defined, manufacturers have implemented the standard more or less early. (See the official dates). The list can be used (if your vehicle is on it), to know in advance if you can buy an ELM interface and whether it will work with your vehicle.
  • The second piece of useful information is the "level" of implementation of the standard. In general, the more recent your vehicle, the more diagnoses you can do on it. The tables list the support modes and their parameters.

How was this list written?

We asked the users of our EOBD-Facile software to help create this list by returning their "log" file of the connection to their vehicle. In exchange for this contribution, the software functions are available for free. The exact procedure is explained on the EOBD-Facile software page.

Understanding sets of figures in the tables

To understand these figures, corresponding to the parameters (PID), we have included a small program free of charge in our software. It is available from the file menu and PID Decoder